Atmega328P-based X-ray Machine Exposure Time Measurement Device with an Android Interface
Abstract
The purpose of this study was to design an X-ray microcontroller-based ATmega328P microcontroller exposure time measurement device. That can be done by integrating an X-ray detection circuit, analog signal conditioner, ATmega328P microcontroller and Bluetooth module HC-05 to display and control the measurement results on mobile phones Android. The benefits of this research are expected to be able to increase knowledge and expertise in the field of radiology instruments through X-ray machine parameter measurement techniques and assist technicians to calibrate the X-ray exposure time parameters.
Full Text:
PDFReferences
L. Wenhui et al., “Acquisition of the optimum X-ray source based on multi-objective optimization model,” in 2017 13th IEEE International Conference on Electronic Measurement & Instruments (ICEMI), 2017, pp. 437–440.
M. E. Savage et al., “Electrical and X-ray diagnostics on the NSTec 2-MA dense plasma focus system,” in 2017 IEEE 21st International Conference on Pulsed Power (PPC), 2017, pp. 1–7.
I. A. Popescu, F. Gradinariu, A. Teodor, D. Havarneanu, I. Alexandrescu, and D. Costin, “Utility and significance of biomarkers used in health status monitoring of ionizing radiation exposed personnel,” in 2017 E-Health and Bioengineering Conference (EHB), 2017, pp. 671–674.
L. N. Kessarinskiy, G. G. Davydov, D. V Boychenko, A. S. Artamonov, A. Y. Nikiforov, and I. B. Yashanin, “X_ray grading procedure for conventional 65-nm CMOS technology,” in 2017 International Siberian Conference on Control and Communications (SIBCON), 2017, pp. 1–3.
N. Nakada, K. Shimazoe, H. Takahashi, and Y. Shikaze, “Directional Gamma-ray imaging for unmanned aerial monitoring system,” in 2017 IEEE/SICE International Symposium on System Integration (SII), 2017, vol. 2018-Janua, pp. 475–480.
Y. Xiao, Z. Chen, and M. Chang, “X-ray digital radiography of operating aero-engines with a universal trigger module,” in 2016 IEEE Nuclear Science Symposium, Medical Imaging Conference and Room-Temperature Semiconductor Detector Workshop (NSS/MIC/RTSD), 2016, pp. 1–3.
C. Bloomer and G. Rehm, “The Use of single-crystal CVD diamond X-ray beam diagnostics for synchrotron beamline commissioning and operation at diamond light source Ltd,” in 2016 IEEE Nuclear Science Symposium, Medical Imaging Conference and Room-Temperature Semiconductor Detector Workshop (NSS/MIC/RTSD), 2016, pp. 1–7.
S. Nidhi, H. Klaer, K. Hansen, M. Turcato, M. Kuster, and M. Porro, “Safety-interlock system of the DSSC X-ray imager,” in 2016 IEEE Nuclear Science Symposium, Medical Imaging Conference and Room-Temperature Semiconductor Detector Workshop (NSS/MIC/RTSD), 2016, pp. 1–4.
B. Norlin, S. Reza, and C. Frojdh, “X-ray fluorescence measurements of toxic metal content in ash from municipal solid waste incineration,” in 2016 IEEE Nuclear Science Symposium, Medical Imaging Conference and Room-Temperature Semiconductor Detector Workshop (NSS/MIC/RTSD), 2016, vol. 2017-Janua, pp. 1–3.
S. Mishra, M. I. Shah, and M. Sarkar, “Characterisation of radiological imaging biomarkers for the identifications of interstitial lung diseases (ILDs) for developing countries,” in 2016 Fourth International Conference on Parallel, Distributed and Grid Computing (PDGC), 2016, pp. 348–350.
P. J. McNally, “B-Spline X-Ray Diffraction Imaging techniques for die warpage and stress monitoring inside fully encapsulated packaged chips,” in 2015 16th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems, 2015, pp. 1–3.
A. Castoldi, C. Guazzoni, S. Maffessanti, G. V. Montemurro, and L. Carraresi, “Application of naked commercial CMOS sensors to X-ray fluorescence and X-ray beam monitoring,” in 2015 IEEE Nuclear Science Symposium and Medical Imaging Conference (NSS/MIC), 2015, pp. 1–3.
D. Magalotti, P. Placidi, M. Dionigi, A. Scorzoni, L. Bissi, and L. Servoli, “A wireless personal sensor node for the Dosimetry of Interventional Radiology operators,” in 2015 IEEE International Symposium on Medical Measurements and Applications (MeMeA) Proceedings, 2015, pp. 196–201.
J. Ma, Y. Wang, Q. Yang, Y. Liu, and P. Shi, “Intelligent simultaneous quantification of environmental trace elements with total reflection X-ray fluorescence,” in 2015 IEEE 15th International Conference on Environment and Electrical Engineering (EEEIC), 2015, no. 2012, pp. 1580–1586.
Sunjoo Hong, Jaehyuk Lee, and Hoi-Jun Yoo, “Wearable lung-health monitoring system with electrical impedance tomography,” in 2015 37th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC), 2015, pp. 1707–1710.
R. Krawczyk et al., “Novel Application of Parallel Computing Techniques in Soft X-Rays Plasma Measurement Systems for the WEST Experimental Thermal Fusion Reactor,” in 2018 26th Euromicro International Conference on Parallel, Distributed and Network-based Processing (PDP), 2018, pp. 118–125.
L. W. Kong and O. A. Martin, “Known void size micro-bump, a novel standard of 3D X-ray computed tomography in-line metrology for accuracy assessment and monitoring,” in 2018 IEEE International Instrumentation and Measurement Technology Conference (I2MTC), 2018, pp. 1–5.
S. Lai et al., “All-Polymer Integrated Circuit for Monitoring the X-Ray Checking History of Luggages,” in 2018 IEEE International Symposium on Circuits and Systems (ISCAS), 2018, vol. 2018-May, pp. 1–4.
L. Amelio and A. Amelio, “CT image registration in acute stroke monitoring,” in 2018 41st International Convention on Information and Communication Technology, Electronics and Microelectronics (MIPRO), 2018, pp. 1527–1532.
C. Alexander et al., “Imaging X-ray Polarimetry Explorer (IXPE) risk management,” in 2018 IEEE Aerospace Conference, 2018, vol. 2018-March, pp. 1–14.
R. A. Ramlee, M. A. Bin Othman, M. I. B. A. Aziz, and H. Asyrani bin Sulaiman, “Low cost heart rate monitoring device using Bluetooth,” in 2014 2nd International Conference on Information and Communication Technology (ICoICT), 2014, pp. 42–46.
V. Mattoli, B. Mazzolai, A. Mondini, S. Zampolli, and P. Dario, “Flexible tag datalogger for food logistics,” Sensors Actuators, A Phys., vol. 162, no. 2, pp. 316–323, 2010.
A. Mohan, S. Johar, and S. Mini, “A Waste Collection Mechanism based on IoT,” in 2017 14th IEEE India Council International Conference (INDICON), 2017, pp. 1–5.
A. Selmani et al., “Multithreading design for an embedded irrigation system running on solar power,” in 2018 4th International Conference on Optimization and Applications (ICOA), 2018, pp. 1–5.
H. U. Zaman, T. A. Khan, S. R. Falgunee, G. S. Rashid, and F. H. Talukder, “Autonomous Firefighting Robot With Optional Bluetooth Control,” in 2018 4th International Conference on Computing Communication and Automation (ICCCA), 2018, pp. 1–4.
K. P. Todorov, L. V. Bogdanov, R. M. Ivanov, and N. Iliev, “Firmware Field Updates Using Bluetooth Low Energy and STM32 Microcontrollers,” in 2018 IEEE XXVII International Scientific Conference Electronics - ET, 2018, pp. 1–4.
Y. Li, Q. Xue, J. He, and T. Zhao, “Design of Music Toy Car Based on Smart Phone Via Bluetooth Remote Control,” in 2018 2nd IEEE Advanced Information Management,Communicates,Electronic and Automation Control Conference (IMCEC), 5193, no. Imcec, pp. 1976–1980.
Y. Affriyenni, G. B. Suparta, and G. Swalaganata, “Measurement of Thermal Expansion Coefficient on Electric Cable Using X-Ray Digital Microradiography,” in 2018 5th International Conference on Electrical Engineering, Computer Science and Informatics (EECSI), 2018, vol. 2018-Octob, pp. 345–349.
A. Bose et al., “Nondestructive Monitoring of Die Warpage in Encapsulated Chip Packages,” IEEE Trans. Components, Packag. Manuf. Technol., vol. 6, no. 4, pp. 653–662, Apr. 2016.
D. Magalotti, P. Placidi, M. Dionigi, A. Scorzoni, and L. Servoli, “Experimental Characterization of a Personal Wireless Sensor Network for the Medical X-Ray Dosimetry,” IEEE Trans. Instrum. Meas., vol. 65, no. 9, pp. 2002–2011, Sep. 2016.
DOI: https://doi.org/10.18196/jrc.1318
Refbacks
- There are currently no refbacks.
Copyright (c) 2020 Journal of Robotics and Control
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Journal of Robotics and Control (JRC)
P-ISSN: 2715-5056 || E-ISSN: 2715-5072
Organized by Peneliti Teknologi Teknik Indonesia
Published by Universitas Muhammadiyah Yogyakarta in collaboration with Peneliti Teknologi Teknik Indonesia, Indonesia and the Department of Electrical Engineering
Website: http://journal.umy.ac.id/index.php/jrc
Email: jrcofumy@gmail.com