Pengembangan Buku Saku Digital Berbasis STEM Berbantuan Appypie: Studi Terhadap Kemampuan Berpikir Kreatif Siswa
Full Article

Keywords

Digital Pocket Book
STEM
Appypie
Creative Thinking

How to Cite

Komarudin, K., Nabilla, G. A., Bahri, S., Puspita, L., & Afandi, M. (2022). Pengembangan Buku Saku Digital Berbasis STEM Berbantuan Appypie: Studi Terhadap Kemampuan Berpikir Kreatif Siswa. Jurnal Tadris Matematika, 5(2), 257-272. https://doi.org/10.21274/jtm.2022.5.2.257-272

Abstract

This study aims to test the feasibility, attractiveness, and effectiveness of learning media in the form of STEM-based digital pocket books assisted by Appypie on students’ creative thinking skills on triangle material. Research and development (R&D) in this study uses the ADDIE model with 5 stages, namely Analysis, Design, Development, Implementation, and Evaluation. The data collection techniques used were interviews, questionnaires, and tests. Data collection instruments in this study include student needs questionnaires, interview sheets, expert validation questionnaires, student response questionnaires, and tests. The data analysis techniques used are expert validation data analysis, and student response data analysis. Based on the results of the validation test, an average score of 3.63 from material experts and 3.70 from media experts was obtained (feasible to use). The attractiveness response that has been carried out in small and large class tests obtained an average score of 3.57 (very interesting) and 3.80 (very interesting), respectively. The effectiveness test on the use of learning media developed in this study could not be carried out due to the constraints of the Covid-19 pandemic, so this research was limited to the development stage. It can be concluded that the STEM-based digital pocket book assisted by Appypie on students' creative thinking skills on triangle material is feasible and interesting to use in the learning process.This study aims to test the feasibility, attractiveness, and effectiveness of learning media in the form of STEM-based digital pocket books assisted by Appypie on students’ creative thinking skills on triangle material. Research and development (R&D) in this study uses the ADDIE model with 5 stages, namely Analysis, Design, Development, Implementation, and Evaluation. The data collection techniques used were interviews, questionnaires, and tests. Data collection instruments in this study include student needs questionnaires, interview sheets, expert validation questionnaires, student response questionnaires, and tests. The data analysis techniques used are expert validation data analysis, and student response data analysis. Based on the results of the validation test, an average score of 3.63 from material experts and 3.70 from media experts was obtained (feasible to use). The attractiveness response that has been carried out in small and large class tests obtained an average score of 3.57 (very interesting) and 3.80 (very interesting), respectively. The effectiveness test on the use of learning media developed in this study could not be carried out due to the constraints of the Covid-19 pandemic, so this research was limited to the development stage. It can be concluded that the STEM-based digital pocket book assisted by Appypie on students' creative thinking skills on triangle material is feasible and interesting to use in the learning process.

https://doi.org/10.21274/jtm.2022.5.2.257-272
Full Article

References

Abouhashem, A., Abdou, R., Bhadra, J., Santhosh, M., Ahmad, Z., & Al-Thani, N. J. (2021). A distinctive method of online interactive learning in STEM education. Sustainability, (Query date: 2022-07-03 18:59:21). Retrieved from https://www.mdpi.com/1407686

Adhyaksono, R., Syafei, I., & Putra, R. W. Y. (2020). Pengaruh model pembelajaran Think Talk Write (TTW) berbantuan buku saku digital terhadap pemahaman konsep matematis. Genta Mulia: Jurnal Ilmiah Pendidikan, 11(2), 70-76.

Adlim, A., Saminan, S., & Ariestia, S. (2015). Pengembangan modul STEM terintegrasi kewirausahaan untuk meningkatkan keterampilan proses sains di SMA Negeri 4 Banda Aceh. Jurnal Pendidikan Sains Indonesia, 3(2), 112–130.

Aldila, C., Abdurrahman, A., & Sesunan, F. (2017). Pengembangan LKPD berbasis STEM untuk menumbuhkan keterampilan berpikir kreatif siswa. Jurnal Pembelajaran Fisika, 5(4), 85-95.

Alodwan, T., & Almosa, M. (2018). The effect of a computer program based on Analysis, Design, Development, Implementation and Evaluation (ADDIE) in improving ninth graders’ listening and reading comprehension skills in english in Jordan. English Language Teaching, 11(4), 43–51. http://dx.doi.org/10.5539/elt.v11n4p43

Anita, Y., Thahir, A., Komarudin, K., Suherman, S., & Rahmawati, N. D. (2021). Buku saku digital berbasis STEM: Pengembangan media pembelajaran terhadap kemampuan pemecahan masalah. Mosharafa: Jurnal Pendidikan Matematika, 10(3), 401–412.

Apriyani, R., Ramalis, T. R., & Suwarma, I. R. (2019). Analyzing students’ problem-solving abilities of direct current electricity in STEM-based learning. Journal of Science Learning, 2(3), 85–91. https://doi.org/10.17509/jsl.v2i3.17559

Arlinwibowo, J., Retnawati, H., & Kartowagiran, B. (2021). How to integrate STEM education in the Indonesian curriculum? A systematic review. Challenges of Science, 18–25.

Baharin, N., Kamarudin, N., & Manaf, U. K. A. (2018). Integrating STEM education approach in enhancing higher order thinking skills. International Journal of Academic Research in Business and Social Sciences, 8(7), 810–822. http://dx.doi.org/10.6007/IJARBSS/v8-i7/4421

Barak, M., & Doppelt, Y. (2000). Using portfolios to enhance creative thinking. Journal of Technology Studies, 26(2), 16–25. http://dx.doi.org/10.21061/jots.v26i2.a.3

Basuki, A., Wulansari, M., Churiyah, M., & Arief, M. (2021). Improve learning outcomes in-office technology lessons by using Appypie. Sixth Padang International Conference on Economics Education, Economics, Business and Management, Accounting and Entrepreneurship (PICEEBA 2020), 278–282. Atlantis Press. https://dx.doi.org/10.2991/aebmr.k.210616.041

Bilfaqih, Y. (2009). Esensi penyusunan materi pembelajaran. Yogyakarta: CV Budi Utama.

Branch, R. M. (2009). Instructional design: The ADDIE approach (Vol. 722). Springer Science & Business Media.

Chen, C.-S., & Lin, J.-W. (2019). A practical action research study of the impact of maker-centered STEM-PjBL on a rural middle school in Taiwan. International Journal of Science and Mathematics Education, 17(1), 85–108. https://doi.org/10.1007/S10763-019-09961-8

Darmika, N. K., Suma, K., & Suastra, I. W. (2014). Pengaruh model pembelajaran kooperatif murder terhadap motivasi belajar dan prestasi belajar IPA siswa SMP. Jurnal Pendidikan dan Pembelajaran IPA Indonesia, 4(1).

Faradhila, N. (2013). Eksperimentasi model pembelajaran Missouri Mathematics Project (MMP) pada materi pokok luas permukaan serta volume prisma dan limas ditinjau dari kemampuan spasial siswa kelas VIII semester genap SMP Negeri 2 Kartasura tahun ajaran 2011/2012. Universitas Negeri Surakarta.

Firdawati, R., Maison, M., & Nazarudin, N. (2021). Development of Mobile Learning Media on Newton’s Laws Using the Appy Pie Application. Jurnal Penelitian Pendidikan IPA, 7(2), 202–206. https://doi.org/10.29303/jppipa.v7i2.599

Gökçen, Y. (2022). The effect of 21st century skills training on foreign language teachers’ perceptions regarding their educational technology and materials development competencies. Bartın University Journal of Faculty of Education, 11(1), 118–136. https://doi.org/10.14686/buefad.777974

Hadi, S. P. I., Kuntjoro, T., Sumarni, S., Anwar, M. C., Widyawati, M. N., & Pujiastuti, R. S. E. (2017). The development of e-partograph module as a learning platform for midwifery students: The ADDIE model. Belitung Nursing Journal, 3(2), 148–156. https://doi.org/10.33546/bnj.77

Hafidz, R. A., Sumardi, K., & Komaro, M. (2019). Desain dan pembuatan media pembelajaran mobile learning pada mata pelajaran sistem dan instalasi tata udara. Journal of Mechanical Engineering Education, 6(1), 71–79. https://doi.org/10.17509/jmee.v6i1.18245

Harlis, H., & Budiarti, R. S. (2018). Development of Appypie-based android application as a learning media about alga in monera and protista course for students majoring in biology education. BIODIK, 4(2), 114–120. https://doi.org/10.22437/bio.v4i2.5850

Irwandani, I. (2016). Potensi media sosial dalam mempopulerkan konten sains islam. Tadris: Jurnal Keguruan dan Ilmu Tarbiyah, 1(2), 173–177. https://doi.org/10.24042/tadris.v1i2.1065

Ismayani, A. (2016). Pengaruh penerapan STEM project-based learning terhadap kreativitas matematis siswa SMK. Indonesian Digital Journal of Mathematics and Education, 3(4), 264–272.

Izzah, K. H., & Azizah, M. (2019). Analisis kemampuan penalaran siswa dalam pemecahan masalah matematika siswa kelas IV. Indonesian Journal of Educational Research and Review, 2(2), 210–218. https://doi.org/10.23887/ijerr.v2i2.17629

Juniarti, A., Septianawati, D., & Hodiyanto, H. (2021). Development of problem based learning-based digital pocket book to improve problem solving ability. Justek: Jurnal Sains Dan Teknologi, 4(2), 48–57. https://doi.org/10.31764/justek.v4i2.6237

Karnuriman, K., Haryono, H., & Wardani, S. (2019). Development of STEM workers based on STEM to optimize curriculum 2013 implementation. Innovative Journal of Curriculum and Educational Technology, 8(2), 74–77. https://doi.org/10.15294/ijcet.v8i2.32525

Komarudin, K., Rosmawati, N., & Suherman, S. (2020). The effect of algebra finger-based brain gym method to improve student learning outcomes. Eduma: Mathematics Education Learning and Teaching, 8(2), 80–88. http://dx.doi.org/10.24235/eduma.v8i2.4202

Komarudin, K., Suherman, S., & Anggraini, A. (2021). Analysis of mathematical concept understanding capabilities: The impact of makerspace STEM learning approach models and student learning activities. Journal of Innovation in Educational and Cultural Research, 2(1), 35–43.

Komarudin, K., & Thahir, A. (2019). Bahan ajar berbasis mathematical comic: Dampak terhadap peningkatan pemahaman matematis peserta didik. Jurnal Pendidikan Matematika RAFA, 5(2), 98–110. https://doi.org/10.19109/jpmrafa.v5i2.4210

Komarudin, K., Utari, I. D., Farida, F., & Suherman, S. (2021). Pengembangan buku saku digital berbasis STEM terhadap pemahaman konsep matematis. JP3M (Jurnal Penelitian Pendidikan Dan Pengajaran Matematika), 7(2), 97–106.

Latifa, I. S., Pamungkas, A. S., Alamsyah, T. P., & Yandari, I. A. V. (2020). Development of android-based Appy Pie learning media on mathematics in elementary school. Prisma Sains: Jurnal Pengkajian Ilmu dan Pembelajaran Matematika dan IPA IKIP Mataram, 8(2), 81–90.

Maj, S. (2022). A practical new 21st century learning theory for significantly improving STEM learning outcomes at all educational levels. EURASIA Journal of Mathematics, Science and Technology Education, 18(2), 1-11. https://doi.org/10.29333/ejmste/11510

Mystakidis, S., Christopoulos, A., & Pellas, N. (2022). A systematic mapping review of augmented reality applications to support STEM learning in higher education. Education and Information Technologies, 27(2), 1883–1927. https://doi.org/10.1007/s10639-021-10682-1

Nisa, T. F. (2011). Pembelajaran matematika dengan setting model Treffinger untuk mengembangkan kreativitas siswa. PEDAGOGIA: Jurnal Pendidikan, 1(1), 35–48.

Noviatika, R., Gunawan, G., & Rokhmat, J. (2019). Pengaruh model pembelajaran berbasis masalah berbantuan mobile pocket book fisika terhadap kemampuan pemecahan masalah peserta didik. Jurnal Pendidikan Fisika dan Teknologi, 5(2), 240–246.

Nugroho, O. F., Permanasari, A., Firman, H., & Riandi, R. (2021). The importance of STEM based education in indonesia curriculum. Pedagonal: Jurnal Ilmiah Pendidikan, 5(2), 56–61.

Olsson, J. (2022). Teacher-student interaction supporting students’ creative mathematical reasoning during problem solving using Scratch. Mathematical Thinking and Learning, 1-28. https://doi.org/10.1080/10986065.2022.2105567

Rahayuningsih, Y. S., & Iskandar, S. (2022). Kepemimpinan kepala sekolah dalam menciptakan budaya sekolah yang positif di era revolusi industri 4.0. Jurnal Basicedu, 6(5), 7850–7857.

Runtukahu, J. T., & Kandou, S. (2016). Pembelajaran matematika dasar bagi anak berkesulitan belajar. Yogyakarta: Ar-Ruzz Media.

Sari, S. Y., Rahim, F. R., Sundari, P. D., & Aulia, F. (2022). The importance of e-books in improving students’ skills in physics learning in the 21st century: A literature review. Journal of Physics: Conference Series, 2309(1), 012061. IOP Publishing. Retrieved from: https://iopscience.iop.org/article/10.1088/1742-6596/2309/1/012061/pdf

Sari, W. R. (2016). Pengembangan perangkat pembelajaran bangun ruang di SMP dengan pendekatan pendidikan matematika realistik. Jurnal Riset Pendidikan Matematika, 3(1), 109–121. http://dx.doi.org/10.21831/jrpm.v3i1.10407

Scott, C. E. (2012). An investigation of science, technology, engineering, and mathematics (STEM) focused high schools in the US. Journal of STEM Education: Innovations and Research, 13(5), 30-39.

Sugiyono. (2018). Metode penelitian pendidikan: Pendekatan kuantitatif, kualitatif, dan R&D. Bandung: Alfabeta.

Suherman, S., Komarudin, K., & Supriadi, N. (2021). Mathematical creative thinking ability in online learning during the Covid-19 pandemic: A systematic review. Online Learning in Educational Research, 1(2), 75–80.

Suherman, S., Vidákovich, T., & Komarudin, K. (2021). STEM-E: Fostering mathematical creative thinking ability in the 21st Century. Journal of Physics: Conference Series, 1882(1), 012164. IOP Publishing. http://dx.doi.org/10.1088/1742-6596/1882/1/012164

Sumarni, W., & Kadarwati, S. (2020). Ethno-STEM project-based learning: Its impact to critical and creative thinking skills. Jurnal Pendidikan IPA Indonesia, 9(1), 11–21.

Suparyati, A. (2018). Peningkatan minat belajar siswa terhadap pembelajaran animasi 2D melalui media berbasis android Appy Pie di sekolah menengah kejuruan. Edudikara: Jurnal Pendidikan Dan Pembelajaran, 3(2), 180–189.

Susilo, Y. (2013). Peningkatan motivasi belajar siswa melalui model pembelajaran kooperatif tipe Numbered Head Together (NHT) materi ajar perbandingan dan fungsi trigonometri pada siswa kelas X. MATHEdunesa, 2(2). https://doi.org/10.26740/mathedunesa.v2n2.p%25p

Švecová, V., Rumanova, L., & Pavlovičová, G. (2014). Support of pupil’s creative thinking in mathematical education. Procedia-Social and Behavioral Sciences, 116, 1715–1719.

Syukri, M., Herliana, F., Soewarno, Rizal, S., & Halim, L. (2021). The skills of high school physics teachers in developing STEM-based learning in K13 curriculum. AIP Conference Proceedings, 2320(1), 020036. AIP Publishing LLC.

Taufan, M., & Nurafifah, L. (2021). Appy Pie integrated mobile learning: Design and feasibility to help the 3D geometry learning process in the time of Covid 19 pandemic. Math Didactic: Jurnal Pendidikan Matematika, 7(2), 124–132.

Ülger, K. (2016). The relationship between creative thinking and critical thinking skills of students. Hacettepe Universitesi Egitim Fakultesi Dergisi-Hacettepe University Journal of Education, 31, 1-16. http://dx.doi.org/10.16986/HUJE.2016018493

Umar, N., & Wiguna, W. (2020). Gamifikasi media pembelajaran matematika berbasis mobile di Sekolah Dasar Negeri Sindangmulya II. EProsiding Sistem Informasi (POTENSI), 1(1), 231–241. Retrieved from: https://eprosiding.ars.ac.id/index.php/psi/article/download/232/126/1602

Vejvodova, J. (2015). The ADDIE model: Dead or alive. Department of Czech Language and Literature, Institute of Lifelong Learning, University of West Bohemia.

Wicaksono, A. G. (2020). Penyelenggaraan pembelajaran IPA berbasis pendekatan STEM dalam menyongsong era revolusi industri 4.0. LENSA (Lentera Sains): Jurnal Pendidikan IPA, 10(1), 54–62. https://doi.org/10.24929/lensa.v10i1.98

Winata, K. A. (2020). Model pembelajaran kolaboratif dan kreatif untuk menghadapi tuntutan era revolusi industri 4.0. SCAFFOLDING: Jurnal Pendidikan Islam dan Multikulturalisme, 2(1), 12–24. https://doi.org/10.37680/scaffolding.v2i1.193

Creative Commons License

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

Downloads

Download data is not yet available.